|
|
 |
|
|
| PUBLICATIONS & ORDERING |
Field-Applied Sprayed Fire-Resistive Materials
 |
|
AWCI Sprayed Fire Resistive Material (SFRM) Industry Standards - 124
The new legal-size single-page document is intended to be included in fireproofing job submittals. It outlines the responsibilities at the jobsite to prevent possible delays and disputes, and to generally inform all concerned parties of the coordination necessary to complete a successful and cost effective fireproofing project. Topics covered in the document include scheduling, pumping station requirements, services provided by others, substrate surface conditions, jobsite conditions prior to the application, patching and post application issues. The reverse side of the document includes a form to be used for specifying itemized application instructions. 1999. 2 pp.
Item # 124
|
| $15.00 |
for AWCI Members (40% off list cost) |  |
| $25.00 | for Non-members. |
|
 |
 |
|
Technical Manual 12-A, 3rd Edition; Standard Practice for the Testing and Inspection of Field Applied Sprayed Fire-Resistive Materials; an Annotated Guide - 122
NEW EDITION! The “Bible” of the sprayed fire-resistive industry, this pocket-size publication provides standard guidelines for inspecting and testing sprayed fireproofing. Updated to include testing criteria for higher bond strength materials and thickness test procedures for pipe columns, the manual reflects ASTM, UL and model code requirements. 1997. 40 pp. Illustrated.
Item # 122
|
| $7.00 |
for AWCI Members (36% off list cost) | |
| $11.00 | for Non-members. |
|
|
 |
|
Technical Manual 12-B, Second Edition; Standard Practice for the Testing and Inspection of Field Applied Thin Film Itumescent Fire-Resistive Materials; an Annotated Guide - 125
Provides field inspection procedures for the testing of thin-film intumescent fire-resistive materials. Includes testing criteria for thickness measurement of applied coatings. 1998. 28 pp. Illustrated
Item # 125
|
| $7.00 |
for AWCI Members (36% off list cost) | |
| $11.00 | for Non-members. |
|
|
|
|
Technical Manual 12: Design Selection Utilizing Spray-Applied Fire Resistive Materials - 123
Technical Manual 12: Design Selection Utilizing Spray-Applied Fire Resistive Materials. This manual provides an introduction to the components commonly used in field-applied sprayed fire-resistive material systems. It includes sections on calculating structural fire-resistance formulas, use of concrete and steel in achieving a fire rating and substituting structural members in an assembly. The appendix explains the W/D ratio, A/P factor, and basic ULI column and beam formulas. 1994. 13 pp. Illustrated.
Item # 123
|
| $7.00 |
for AWCI Members (36% off list cost) | |
| $11.00 | for Non-members. |
|
|
|
|
Thickness Gauges - 121
Measure the thickness of sprayed fire protection materials with this specially designed rule with a needle probe and sliding indicator. It has been approved for use by most code authorities and complies with criteria outlined in AWCI Technical Manual T-12A (Item #122). Sold only in pairs.
Item # 121
|
| $22.00 |
for AWCI Members (33% off list cost) | |
| $33.00 | for Non-members. |
|
|
|
|
| © Copyright 2012 AWCI | All rights reserved. |
|
